Name: Sitting Cross Sticks - Rack and Pinion Adjustable
Availability: InStock

Sitting Cross Sticks - Rack and Pinion Adjustable

Sitting Cross Sticks - Rack and Pinion Adjustable

$200.00

Upright/Sitting Cross Sticks

Extras Available

Extras available - achieve total flexibility

Prone Upgrade - Legs, Mast, Mast Extender- Fully Finished (Mast extender part only, wood NOT included): +$35.00

Prone Upgrade KIT - Rack, Rack Scales, Leg feet, Mast Extender extras (Wood Not included - Templates Included): +$20.00

Mast Extender - Extend max elevation on all setups (Included with prone upgrade and prone upgrade kit): +$7.50

Ground Stakes - AR50 Steel - 8" (only available until supply runs out): +$30.00

Personalization - Name or Logo (Include choice in comments at checkout): +$5.00

Color Choice (REQUIRED)

Main Bracket and Wiping Cradle

Brown

Navy

Army Green

Black

Color Choices:

!! THESE ARE NO LONGER ALLOWED AT THE QUIGLEY MATCH !!

NOT ALLOWED for NRA sanctioned Silhouette Shoots - check with local match director for use in non-NRA shoots

ALLOWED for sanctioned BPTR shoots

Rack and pinion adjustable height. Red Oak - finished with several coats polyurethane
Two sizes available Med - 20.5" to 35" or Tall 25.5" to 46" - either can extend MAX height as needed with Mast Extender. Best to order Med version if barrel height from muzzle to ground is less than 25.5" since it can still be extended to whatever height necessary later on. Wiping cradle and stake/spike storage mounts included (as shown on the legs in the pictures - both can be moved and tightened anywhere on the leg)
Prone upgrade includes short legs, short mast, mast extender - Adjustable between 9.5" to 18" - Max height can be extended to any height using the mast extender. Switch over to prone or back in minutes
Full size kit available - This is a very simple build with a few tools. Templates included for all hole positioning and angle cuts. Best to have a drill press and disc sander. All 3D printed parts and hardware included (Wood not included)
- 3 - 24", 3/4" x 2 1/2" wood is all that is need to build TALL version. Build manual details wood sizing.
- Download Build Manual
- Download Operation Manual
Prone Kit - Add ALL the extras to build the prone upgrade above. Includes shortened rack, scales, templates, leg feet (wood not included)
Feet - Allow the use of AR450 Steel 1" x 3/16" x 9" stakes ($30 option) or 3/8" x 10" spikes available from local hardware store. (AR450 steel stakes only available until supply is depleted.) The 3/8"x10" spikes work very well because the feet are 2" wide at the bottom and provide a fair amount of stability on their own.
Main bracket can be embossed with a name or logo in lower section - front, back, or both

NOTE: All options that include the Mast Extender is for the part only - This provides the flexibility to add whatever length of 3/4" x 2.5" wood needed to achieve desired results.

Video from Quigley 2024 (when cross sticks were still allowed)

Improvements since this video

Much improved rack and pinion brake
Tensioning knobs to remove all fore/aft and side play at setup
Wider feet to improve setup stability and accommodate choice of grounding stakes/spikes